7 Amp Connector 6-Pin Superseal (+20cm Cable)   DIMENSIONS Width 411 mm Depth 106 mm Height 82 mm   CERTIFICATION IP Rating # IP68 High Beam (E9 approval) ECE R149 - Ref: 20 (in Low Output Mode only) Position Light (white only) ECE R148 Beacon Function ECE R65 (XA1) EMC Certification ECE R10 Salt Spray Test ISO 9227 Dump Load Protection ISO 7637-2   PHOTOMETRIC DATA Horizontal / Vertical Beam Angle 28° / 16° 0

scale and rust deposits from the internal surfaces of automotive cooling systems and restores heat transfer efficiency to allow the engine to run at its designed operating temperature

Ball-ended - provides 25 degrees movement up to 6mm and 23 degrees on 8mm and 10mm

Light functions: 5 - with daytime running light (LED)/with position light (LED)/with high beam (LED)/with dynamic bending light/with low beam (LED)/with cornering light (LED)

81521026107

EBS 02.06.25.010 BRAKE CHAMBER - SINGLE - DISC - TY25 ( 4235110100 ) 3/8" Bit Socket Sets 7 Amp Connector 6-Pin SupersealBrake chambers are used on truck and trailer air brake systems, located at each wheel, where compressed air is converted into a mechanical force used to apply the brakes and stop the vehicle. They are also designed to apply the the brakes automatically in the event that there is a loss of system air pressure. This happens because the air pressure holding back the heavy parking emergency spring dissipates allowing the spring to extend the pushrod which